Cisco Broadband Cable Command Reference Guide

Chapter 2 Cisco Cable Modem Termination System Commands
OL-1581-05
Cisco Broadband Cable Command Reference Guide
show packetcable gate
The following example shows a typical display for a specific gate. Both downstream and upstream gates
are shown unless you also specify either the downstream or upstream option.
Router# show packetcable gate 196
GateID : 196
Subscriber ID : 4.4.1.22
GC Address : 192.168.80.15
State : COMMITTED
Gate specs [UPSTREAM]
Gate classifier : [protocol 17,
src addr/port 4.4.1.22/0,
dest addr/port 3.3.1.3/3456
diffserv dscp : 0x6000000
timer t1(ms) : 180000
timer t2(ms) : 2000
commit flags : 0x0
session class : 0x1
flowspec # 1 : [r/b/p/m/M 1176256512/1128792064/1176256512/200/200]
[R/S: 1176256512/0]
Gate specs [DOWNSTREAM]
Gate classifier : [protocol 17,
src addr/port 3.3.1.3/0,
dest addr/port 4.4.1.22/0
diffserv dscp : 0x9000000
timer t1(ms) : 180000
timer t2(ms) : 2000
commit flags : 0x0
session class : 0x1
flowspec # 1 : [r/b/p/m/M 1176256512/1128792064/1176256512/200/200]
[R/S: 1176256512/0]
Remote Gate
address/port : 172.22.79.22/1812
gate coord flag : 2
algo : 100
security key[16] : 30 31 32 33 34 35 36 37 38 39 30 31 32 33 34 35
Billing Info
primary RKS : [addr/port 1.9.62.12/1813]
secondary RKS : [addr/port 255.255.255.255/65535]
flags : 0
billing corr ID : [3D 38 96 CC 20 20 20 20 31 30 20 30 00 00 00 41 ]
Table 2-44 describes the major fields shown in the show packetcable gate display.
Table 2-44 show packetcable gate Field Display
Field Description
GateID Unique number identifying the local gate.
Slot Cable interface on the Cisco CMTS.
Subscriber ID IP address for the subscriber for this service request.
GC-Addr IP address for the gate controller that is responsible for this gate.
2-467