27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 3 <strong>Command</strong>s for the <strong>Cisco</strong> uBR10012 Router<br />

show hardware pxf cable interface<br />

Syntax Description<br />

OL-1581-05<br />

show hardware pxf cable interface<br />

To display information about a particular service ID (SID) on a particular cable interface, use the show<br />

hardware pxf cable command in privileged EXEC mode.<br />

Defaults No default behavior or values.<br />

<strong>Command</strong> Modes Privileged EXEC<br />

<strong>Command</strong> History<br />

show hardware pxf cable interface cx/y/z sid {classifiers | mac-rewrite | queue | service-flow ds<br />

| service-flow us}<br />

cx/y/z Identifies the cable interface for which information should be displayed.<br />

sid Identifies the service ID (SID) for which information should be displayed.<br />

The valid range is 1 to 8191.<br />

classifiers Displays the packet classifiers used for this SID.<br />

mac-rewrite Displays the CPE MAC information for this SID.<br />

queue Displays the status of the queues being used by this SID.<br />

service-flow ds Displays the service flow IDs (SFID) associated with the given SID on the<br />

downstream for the given cable interface.<br />

service-flow us Displays the SFIDs associated with the given SID on the upstream for the<br />

given cable interface.<br />

Release Modification<br />

12.2(11)BC2 This command was introduced for the <strong>Cisco</strong> uBR10012 router.<br />

Usage <strong>Guide</strong>lines The show hardware pxf cable interface command displays the DOCSIS-related information for a<br />

particular service ID (SID) on a particular cable interface.<br />

Examples The following example shows a typical display for SID 1 on cable interface c8/0/0 for the show<br />

hardware pxf cable interface classifiers command:<br />

Router# show hardware pxf cable interface c8/0/0 1 classifiers<br />

CM Classifiers:<br />

Mac Rw Index: 18 CCB Index: 47<br />

id=1, sfid=91 CFR Index 16461 RP sfindex 16461,<br />

prio=7, sip=0.0.0.0, sip mask=0.0.0.0<br />

dip=0.0.0.0, dip mask=0.0.0.0, prot=17, tos=0,FF<br />

sport = 0,65535, dport = 0,65535 matches = 0<br />

id=2, sfid=92 CFR Index 16462 RP sfindex 16462,<br />

prio=6, sip=0.0.0.0, sip mask=0.0.0.0<br />

dip=1.11.22.2, dip mask=255.255.255.255, prot=256, tos=0,FF<br />

sport = 0,65535, dport = 0,65535 matches = 0<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

3-41

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!