27.03.2013 Views

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

Cisco Broadband Cable Command Reference Guide

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 2 <strong>Cisco</strong> <strong>Cable</strong> Modem Termination System <strong>Command</strong>s<br />

OL-1581-05<br />

Packets received : 0<br />

Bytes received : 0<br />

Fragment reassembly completed : 0<br />

Fragment reassembly incomplete : 0<br />

Concatenated packets received : 0<br />

Queue-indicator bit statistics : 0 set, 0 granted<br />

Good Codewords rx : 0<br />

Corrected Codewords rx : 0<br />

Uncorrectable Codewords rx : 0<br />

Concatenated headers received : 0<br />

Fragmentation headers received : 0<br />

Fragmentation headers discarded: 0<br />

Router#<br />

show interface cable sid<br />

The following example shows typical verbose output for the SID counters on the <strong>Cisco</strong> uBR-MC5X20<br />

cable interface line card:<br />

Router# show interface c4/0 sid 3 counters verbose<br />

Sid : 1<br />

Request polls issued : 0<br />

BWReqs {Cont,Pigg,RPoll,Other} : 0, 1052, 1052, 0<br />

No grant buf BW request drops : 0<br />

Rate exceeded BW request drops : 0<br />

Grants issued : 1052<br />

Packets received : 0<br />

Bytes received : 0<br />

Fragment reassembly completed : 0<br />

Fragment reassembly incomplete : 0<br />

Concatenated packets received : 0<br />

Queue-indicator bit statistics : 0 set, 0 granted<br />

Good Codewords rx : 53<br />

Corrected Codewords rx : 6110<br />

Uncorrectable Codewords rx : 8540896<br />

The following example shows typical output for the association keyword:<br />

Router# show interface cable5/0 sid association<br />

Sid Prim Online IP Address MAC Address Interface VRF Name<br />

1 online 195.151.129.20 0003.e38f.e993 Ca5/0.50 green<br />

2 online 195.151.129.17 0003.e38f.e89d Ca5/0.50 green<br />

3 init(t) 195.151.129.12 00d0.baa2.fb93 Ca5/0.50 green<br />

Router#<br />

The following example shows the error message that is displayed when you attempt to use this command<br />

on a subinterface:<br />

Router# show interface cable6/0.1 sid<br />

<strong>Command</strong> not allowed on sub-interface<br />

Please use main interface C6/0<br />

The following example shows sample output for the secondary-ip keyword:<br />

Router# show interface cable5/0 sid secondary-ip<br />

For sid 1 secondary ip list contains 2 address(es)<br />

195.151.129.20<br />

196.100.81.123<br />

For sid 2 secondary ip list contains 2 address(es)<br />

195.151.129.17<br />

10.10.11.3<br />

Router#<br />

<strong>Cisco</strong> <strong>Broadband</strong> <strong>Cable</strong> <strong>Command</strong> <strong>Reference</strong> <strong>Guide</strong><br />

2-455

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!