Cisco Broadband Cable Command Reference Guide

Chapter 3 Commands for the Cisco uBR10012 Router
OL-1581-05
show hardware pxf cable interface
The following example shows a typical display for SID 1 on cable interface c8/0/0 for the show
hardware pxf cable interface service-flow ds command:
Router# show hardware pxf cable interface c8/0/0 1 service-flow ds
RP SFID LC SFID Bytes Packets QID
16460 4 0 0 281
16461 91 0 0 282
16462 92 0 0 283
16463 93 0 0 284
16464 94 0 0 285
Router#
The following example shows a typical display for SID 1 on cable interface c8/0/0 for the show
hardware pxf cable interface service-flow us command:
Router# show hardware pxf cable interface c8/0/0 1 service-flow us
SFID SID
3 1
90 21
Router#
Related Commands Command Description
clear pxf Clears the direct memory access (DMA) and error checking and correcting
(ECC) error counters on the PXF processor.
debug pxf Enables debugging of the PXF subsystems on the active PRE1 module on
the Cisco uBR10012 router.
show hardware pxf
cable
show hardware pxf
cpu
show hardware pxf
microcode
show hardware pxf
xcm
Displays information about the multicast echo and packet intercept features
for one or all cable interfaces.
Displays the display different statistics about the operation of the CPU
processor during PXF processing.
Displays identifying information for the microcode being used on the
processor.
Displays the current state of error checking and correcting (ECC) for the
External Column Memory (XCM) on the PXF processor.
Cisco Broadband Cable Command Reference Guide
3-43