OPERATION MANUAL CompoBus/S

More documents

Recommendations

Info

SRM1-C0@-V2 Master Control Units Section 4-5 General Specifications Item Specifications Power supply voltage 24 V DC Allowable power supply 20.4 to 26.4 V DC voltage Power consumption 3.5 W max. Inrush current 12.0 A max. Noise immunity 1500 Vp-p with a pulse width of 0.1 to 1 µs and a rise time of 1 ns (via impulse noise simulator) Vibration resistance Conforming to JIS C0911: 10 to 57 Hz with single-amplitude of 0.075 mm 57 to 150 Hz with fixed acceleration of 9.8 m/s 2 10 sweeps each in X, Y, and Z directions (8 minutes per sweep × 10 sweeps = 80 minutes) Shock resistance Conforms to JIS C0912 147 m/s 2 3 times each in X, Y, and Z directions Ambient temperature Operating: 0 to 55°C Storage: – 20 to 75°C Ambient operating rela- 10% to 90% (with no condensation) tive humidity Operating environment No corrosive gases Terminal screw size M3 Power holding time DC power: 2 ms min. Weight 150 g max. Master Specifications Item Specifications I/O points 256 points (128 inputs/128 outputs) or 128 points (64 inputs/64 outputs) (Determined by the usable node number setting in DM. The default setting is 256 points.) Number of points per 8-point mode node number Usable node numbers IN0 to IN15/OUT0 to OUT15 or IN0 to IN7/OUT0 to OUT7 (Can be switched with setting in DM.) I/O words Input: IR 000 to 007 Output: IR 010 to 017 Programming language Ladder program Instructions 14 basic instruction + 81 special instructions with 129 variations Processing speed LD instruction: 0.97 µs, MOV instruction: 9.1 µs Program capacity 4,096 words Data memory 2,022 words + 512 words (Read only) Timers/Counters 128 total Work bits 640 Memory backup Flash memory: User programs, etc. (without battery) Lithium battery: Data memories, etc. (Battery life: 10 years or more at ambient temperature of 25°C) Peripheral port 1 port 137
SRM1-C0@-V2 Master Control Units Section 4-5 Dimensions (Common) 138 Item Specifications RS-232C port 1 port (SRM1-C02-V2 only) Host link, NT link, 1:1 PLC link, ASCII data transfer with XON, XOFF flow control Programming Devices Programming Console (CQM1-PR001-E/C200H-PR027-E) SYSMAC Support Software C500-ZL3AT1-E (for IBM PC/AT, English version) 110 85.5 100 ± 0.2 15 PWR RUN ERR SD RD ERS COMM 40 Mounting Holes 30 ± 0.2 Two, 4.2 dia. or M4 60 (Unit: mm) 36
Page 1 and 2:
Cat. No. W266-E1-09 C200HW-SRM21-V1
Page 4:
Notice: OMRON products are manufact
Page 7 and 8:
viii TABLE OF CONTENTS SECTION 5 Sl
Page 9 and 10:
x Product Name Series Manual Name C
Page 11 and 12:
Application Considerations xii SUIT
Page 14 and 15:
PRECAUTIONS This section provides g
Page 16 and 17:
Operating Environment Precautions 4
Page 18 and 19:
Application Precautions 5 Pay caref
Page 20:
Conformance to EC Directives 6 6 Co
Page 23 and 24:
System Overview and Features Sectio
Page 25 and 26:
System Overview and Features Sectio
Page 27 and 28:
CompoBus/S System Configuration Sec
Page 29 and 30:
CompoBus/S System Configuration Sec
Page 31 and 32:
Compatible Devices Section 1-3 Cabl
Page 33 and 34:
Compatible Devices Section 1-3 Term
Page 35 and 36:
Compatible Devices Section 1-3 14 a
Page 37 and 38:
Compatible Devices Section 1-3 16 T
Page 39 and 40:
Compatible Devices Section 1-3 18 C
Page 41 and 42:
Startup Procedure Section 1-4 Conne
Page 44 and 45:
SECTION 2 CompoBus/S System Specifi
Page 46 and 47:
System Configuration Section 2-2 I/
Page 48 and 49:
System Configuration Section 2-2 Sl
Page 50 and 51:
System Configuration Section 2-2 Sl
Page 52 and 53:
Supplying Power to the Slaves Secti
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
System Configuration Using Water-re
Page 64 and 65:
I/O Response Time Characteristics S
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
SECTION 3 CompoBus/S System Wiring
Page 76 and 77:
Connector Installation (Special Fla
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
VCTF Cable Assembly Section 3-3 Bra
Page 88 and 89:
Master/Slave Connecting Cables Sect
Page 90 and 91:
Master/Slave Connecting Cables Sect
Page 92 and 93:
Operations Checklist Section 3-5 CS
Page 94 and 95:
SECTION 4 Master Unit Specification
Page 96 and 97:
C200HW-SRM21-V1 Master Unit for CS-
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109: C200HW-SRM21-V1 Master Unit for CS-
Page 110 and 111: CS1W-SRM21 Master Unit for CS-serie
Page 126 and 127: CJ1W-SRM21 Master Unit for CJ-serie
Page 148 and 149: CQM1-SRM21-V1 Master Unit for CQM1
Page 160 and 161: SRM1-C0@-V2 Master Control Units Se
Page 162 and 163: CPM2C-S Series CPM2C-S@@@C (-DRT) S
Page 164 and 165: CPM2C-S Series CPM2C-S@@@C (-DRT) S
Page 166 and 167: SECTION 5 Slave Specifications and
Page 168 and 169: Remote Terminals Section 5-1 5-1 Re
Page 170 and 171: Remote Terminals Section 5-1 Indica
Page 172 and 173: Remote Terminals Section 5-1 The fo
Page 176 and 177: Remote Terminals Section 5-1 CompoB
Page 178 and 179: Remote Terminals Section 5-1 5-1-2
Page 190 and 191: Remote Terminals Section 5-1 Termin
Page 202 and 203: Remote Terminals Section 5-1 Slave
Page 206 and 207: Remote Terminals Section 5-1 SRT@-M
Page 208 and 209:
Remote Terminals Section 5-1 Relay
Page 210 and 211:
Remote Terminals Section 5-1 Indica
Page 212 and 213:
Remote Terminals Section 5-1 BS+ BS
Page 214 and 215:
Remote Terminals Section 5-1 SRT@-R
Page 216 and 217:
Connector Terminals Section 5-2 Ite
Page 218 and 219:
Connector Terminals Section 5-2 Sla
Page 220 and 221:
Connector Terminals Section 5-2 Nod
Page 222 and 223:
Connector Terminals Section 5-2 The
Page 224 and 225:
Connector Terminals Section 5-2 Rei
Page 226 and 227:
Connector Terminals Section 5-2 Is
Page 228 and 229:
Connector Terminals Section 5-2 Dim
Page 230 and 231:
Connector Terminals Section 5-2 c.
Page 232 and 233:
Connector Terminals Section 5-2 Mou
Page 234 and 235:
Connector Terminals Section 5-2 5-2
Page 236 and 237:
Connector Terminals Section 5-2 Sla
Page 238 and 239:
Page 240 and 241:
Connector Terminals Section 5-2 The
Page 242 and 243:
Connector Terminals Section 5-2 Rei
Page 244 and 245:
Connector Terminals Section 5-2 Is
Page 246 and 247:
Page 248 and 249:
Connector Terminals Section 5-2 a.
Page 250 and 251:
Connector Terminals Section 5-2 Int
Page 252 and 253:
Connector Terminals Section 5-2 MIL
Page 254 and 255:
Connector Terminals Section 5-2 Com
Page 256 and 257:
Connector Terminals Section 5-2 Mou
Page 258 and 259:
Connector Terminals Section 5-2 Out
Page 260 and 261:
Page 262 and 263:
Connector Terminals Section 5-2 Wir
Page 264 and 265:
Connector Terminals Section 5-2 Ter
Page 266 and 267:
Page 268 and 269:
Connector Terminals Section 5-2 Inp
Page 270 and 271:
Connector Terminals Section 5-2 Ind
Page 272 and 273:
Connector Terminals Section 5-2 Wir
Page 274 and 275:
Connector Terminals Section 5-2 Ter
Page 276 and 277:
Page 278 and 279:
Connector Terminals Section 5-2 3.
Page 280 and 281:
Connector Terminals Section 5-2 fir
Page 282 and 283:
Remote I/O Modules Section 5-3 Outp
Page 284 and 285:
Remote I/O Modules Section 5-3 2. T
Page 286 and 287:
Remote I/O Modules Section 5-3 Prec
Page 288 and 289:
Remote I/O Modules Section 5-3 BD L
Page 290 and 291:
Water-resistant Terminals Section 5
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Sensor Terminals Section 5-5 5-5 Se
Page 310 and 311:
Sensor Terminals Section 5-5 Slave
Page 312 and 313:
Sensor Terminals Section 5-5 Hold/C
Page 314 and 315:
Sensor Terminals Section 5-5 The fo
Page 316 and 317:
Sensor Terminals Section 5-5 5-5-2
Page 318 and 319:
Sensor Terminals Section 5-5 DIP Sw
Page 320 and 321:
Sensor Terminals Section 5-5 Intern
Page 322 and 323:
Fiber Amplifier Communications Unit
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Analog Input Terminals Section 5-7
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Analog Output Terminals Section 5-8
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
I/O Link Units for CPM1A and CPM2A
Page 350 and 351:
I/O Link Units for CPM1A and CPM2A
Page 352 and 353:
I/O Link Units for CPM2C Section 5-
Page 354 and 355:
I/O Link Units for CPM2C Section 5-
Page 356 and 357:
Sensor Amplifier Terminals Section
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372:
Application Precautions Section 5-1
Page 375 and 376:
Turning the Power ON Section 6-1 6-
Page 377 and 378:
Checking Operations for CS-series,
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Checking Operations of CS-series an
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Checking Operations of CQM1 Master
Page 401 and 402:
Checking Operations of CQM1 Master
Page 403 and 404:
Checking Slave Operations Section 6
Page 405 and 406:
Cleaning and Inspection Section 6-6
Page 407 and 408:
Precautions for Replacement of Unit
Page 409 and 410:
Standard Models Appendix Compatible
Page 411 and 412:
Standard Models Appendix Water-resi
Page 413 and 414:
Standard Models Appendix Connectors
Page 415 and 416:
Standard Models Appendix MIL-compat
Page 417 and 418:
396 DIP switch, 249 indicators, 249
Page 419 and 420:
398 Analog Input Terminals, 16, 389
Page 421 and 422:
400 Terminal-block Terminator speci
Page 423 and 424:
402 Revision History Revision code
Page 425:
Authorized Distributor: Cat. No. W2
show all

OPERATION MANUAL CompoBus/S

Create successful ePaper yourself

Delete template?

Save as template?