OPERATION MANUAL CompoBus/S

Fiber Amplifier Communications Units Section 5-6
SRT@-OD08S Dimensions The following diagram shows the dimensions for the SRT@-OD08S. All
dimensions are in mm.
Mounting Holes
Two, 4.2 dia. or M4
5-6 Fiber Amplifier Communications Units
5-6-1 E3X-SRT21 Fiber Amplifier Communications Unit
(74.8)
The Fiber Amplifier Communications Units are Communications Units for
E39-TM1 Terminal Block Units or E3X-DA-N-series Digital Fiber Amplifier
Units used with Optical Fiber Sensors.
Note In the following description, Digital Fiber Amplifier Units and Terminal Block
Units are referred to collectively as Fiber Amplifier Units
The E3X-SRT21 uses CompoBus/S and receives input from the Fiber Amplifier
Unit. (Models that function as DeviceNet or RS-422A Slaves are also
available.)
Fiber Amplifier Units with connectors can also be used. Data is exchanged
with the Fiber Amplifier Units by connecting the Fiber Amplifier Communications
Unit to the left side of the multiple Fiber Amplifier Units.
The E3X-MC11 Mobile Console for Fiber Amplifier Units can also be connected.
301