OPERATION MANUAL CompoBus/S

Remote Terminals Section 5-1
SRT@-MD16T/MD16T-1
Dimensions
(54)
50
Mounting Holes
Two, 4.2 dia. or M4
The following diagram shows the dimensions for the SRT@-MD16T/MD16T-1.
All dimensions are in mm.
180
170±0.2
Note The circuit block can be removed by loosening the circuit block mounting
screw. Before removing the circuit block for replacement, check that all power
supplies, including I/O power supply, to the Unit are turned OFF.
5-1-6 SRT@-RO@@@ Remote Terminals with Relay/Power MOS FETs
Specifications The following tables and graphs show the ratings and output specifications for
the SRT@-RO@@@.
Ratings
Item Specification
Models SRT1-ROC08
SRT1-ROF08
SRT1-ROC16
SRT1-ROF16
SRT2-ROC08
SRT2-ROF08
SRT2-ROC16
SRT2-ROF16
Output points SRT@-ROC08: 8 relay outputs
SRT@-ROF08: 8 power MOS FET outputs
SRT@-ROC16: 16 relay outputs
SRT@-ROF16: 16 power MOS FET outputs
(The 16-output Remote Terminals cannot be used with a
CQM1-SRM21 Master Unit that is in 4-point mode.)
40±0.2
(83)
58
185