03.08.2013 Views

OPERATION MANUAL CompoBus/S

OPERATION MANUAL CompoBus/S

OPERATION MANUAL CompoBus/S

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Startup Procedure Section 1-4<br />

Arrangement of Master and Slaves (Refer to page 8 and page 25.)<br />

Cable types applicable for the communications distance and communications<br />

mode (Refer to page 16 and page 29.)<br />

Connection methods (Refer to page 8 and page 27.)<br />

Methods for supplying communications and I/O power supplies (Refer to<br />

page 31.)<br />

Connectors and terminal block models (Refer to page 6 and page 27.)<br />

Setting the Master Unit Set the Master Unit according to the model used, referring to SECTION 4<br />

Master Unit Specifications and Operations.<br />

CS-series, C200HX/HG/HE-(Z)E, and C200HS Master Units (C200HW-<br />

SRM21-V1)<br />

Special I/O Unit unit number<br />

Number of nodes that can be connected<br />

Communications mode<br />

CS-series Master Units (CS1W-SRM21)<br />

Special I/O Unit unit number<br />

Number of nodes that can be connected<br />

Communications mode<br />

Slave registration function (Set in DM Area while connected to the PLC.)<br />

Communications stop mode setting function<br />

CJ-series Master Units<br />

Special I/O Unit unit number<br />

Number of nodes that can be connected<br />

Communications mode<br />

Slave registration function (Set in DM Area while connected to the PLC.)<br />

Communications stop mode setting function<br />

CQM1 Master Units<br />

Number of words allocated to the CPU<br />

Number of bits allocated for each node number<br />

Communications mode<br />

Setting the Slaves Set the Slave Units, referring to SECTION 5 Slave Specifications and Operations.<br />

Node number<br />

Communications mode<br />

Settings specific to each Slave (such as output holding/clearing when<br />

communications errors occur)<br />

Wiring Wire and connect the communications cables, communications power supply,<br />

I/O power supply, referring to the device specifications in SECTION 4 Master<br />

Unit Specifications and Operations, SECTION 5 Slave Specifications and<br />

Operations, and wiring information in SECTION 3 <strong>CompoBus</strong>/S System Wiring.<br />

Starting and Checking<br />

Operations<br />

Start the <strong>CompoBus</strong>/S System and check the Master and Slave operations,<br />

referring to SECTION 6 Starting Communications.<br />

Starting Operations Start operating the Master and Slaves.<br />

21

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!