OPERATION MANUAL CompoBus/S

Water-resistant Terminals Section 5-4
I/O power supply
I/O power supply
Input 1
Input 1
SRT2-ID08CL
Input 0
SRT2-ID08CL-1
Input 0
Input 3
Input 3
Blue
(black)
Input 2
2-wired sensor
(or limit switch)
Blue
(black)
Brown
(white)
2-wired sensor
(or limit switch)
Input 5
Note 1. The V terminals are all connected internally, as are the G terminals. Input
connectors G and V can be used to supply power to sensors, provided that
the total current flow through these connectors is less than 2.4 A when input
power supply is provided to the external power supply connector. Connect
external power supply if the total current flow is 2.4 A or more.
2. Wire colors have been changed. Colors in parentheses are the old wire
colors.
Input 4
Input 2 Input 4
Brown
(white)
Input 5
Input
7
Input
6
Blue
(black)
Black
(white)
Brown
(red)
3-wired sensor with NPN
output (photoelectric sensor
or proximity switch)
Input
7
Input
6
Blue
(black)
Black
(white)
Brown
(red)
3-wired sensor with PNP
output (photoelectric sensor
or proximity switch)
273