OPERATION MANUAL CompoBus/S

Compatible Devices Section 1-3
PLC C200HX-CPU3@-
(Z)E/ CPU4@-(Z)E,
C200HG-CPU3@-
(Z)E/CPU4@-(Z)E,
C200HE, C200HS
Max. number
of I/O
points per
Master
Number of
points per
node number
Number of
usable
node numbers
per
Master
Master
Unit power
supply
C200HX-CPU5@-
(Z)E/ CPU6@-(Z)E/
CPU8@-(Z)E,
C200HG-CPU5@-
(Z)E/ CPU6@-(Z)E,
CS Series
256 points (128 inputs/128 outputs) or 128 points (64 inputs/64 outputs)
The max. number of I/O points depends on the DIP switch settings.
The area allocated to Special I/O Units is used for I/O.
CQM1-CPU11-E/
21-E:
32 points (16 inputs/
16 outputs) or
64 points (32 inputs/
32 outputs)
CQM1-CPU41-EV1/
42-EV1/
43-EV1/44-EV1:
32 points (16
inputs/16 outputs)
or
64 points (32
inputs/32 outputs)
or
128 points
(64 inputs/
64 outputs)
The max. number of
I/O points depends
on the DIP switch
settings.
The IR area is used
for I/O.
8-point mode 8-point mode 8-point mode or 4point
mode
IN0 to IN7 and OUT0 to OUT7 or IN0 to
IN15 and OUT0 to OUT15
Not required. (Power is supplied from the
PLC.)
CS Series CJ Series CQM1, CQM1H
IN0 to IN7 and OUT0 to OUT7 or IN0 to
IN15 and OUT0 to OUT15
Not required. (Power is supplied from the
PLC.)
When 8 points are
used per node:
IN0 to IN1/OUT0
to OUT1 or
IN0 to IN3/OUT0
to OUT3 or
IN0 to IN7/OUT0
to OUT7
When 4 points are
used per node:
IN0 to IN3/OUT0
to OUT3 or
IN0 to IN7/OUT0
to OUT7 or
IN0 to IN15/OUT0
to OUT15
Not required.
(Power is supplied
from the PLC.)
11