OPERATION MANUAL CompoBus/S

Connector Terminals Section 5-2
222
SRT2-VOD16ML
CompoBus/S
communications
Output
device
Solenoid, etc.
Output
device
Valve, etc.
2. When inductive loads such as solenoids and valves are used, either use
loads with built-in diodes that absorb the back-electromotive force or connect
a diode externally.
CompoBus/S
communications
power supply
I/O power
supply
▲Mark
SRT2-VOD16ML-1
CompoBus/S
communications
Output
device
Solenoid, etc.
Output
device
Valve, etc.
CompoBus/S
communications
power supply
I/O power
supply
▲Mark
Note 1. The V terminals are all connected internally, as are the G terminals. When
providing I/O power from a communications connector, power can be provided
to output devices from the V and G terminals of the MIL Connector.
2. When inductive loads such as solenoids and valves are used, either use
loads with built-in diodes that absorb the back-electromotive force or connect
a diode externally.
Compatible External Output Devices and Cables
Models with Sensor Connectors (SRT2-VOD08S-1)
The XS8A-0441 and XS8A-0442 Connectors (sold separately) are used to
connect to external output devices. Use the following flowchart to check the
compatibility of external output devices and cables. Refer to 3-4-3 Cable Connector
Wiring and Assembly for details on the assembly, wiring, and installation
of cable connectors.
Locking Lever