03.08.2013 Views

OPERATION MANUAL CompoBus/S

OPERATION MANUAL CompoBus/S

OPERATION MANUAL CompoBus/S

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Sensor Amplifier Terminals Section 5-11<br />

Allocation to Master CPU<br />

Unit<br />

program to read the data twice consecutively on the input side and treat<br />

the data as valid data only if the same data is read both times.<br />

2. Output bits allocated to the I/O Link Unit for CPM2C but not used for data<br />

output can be used as work bits.<br />

3. Allocated input bits cannot be used as work bits regardless of the input bits<br />

are used for data input or not.<br />

The 8 input and 8 output points allocated to the I/O memory of the CPM2C<br />

CPU Unit will be allocated in the Special I/O Unit data area of the Master CPU<br />

Unit according to the node number. Both 8 input and 8 output points use the<br />

same node number. For example, if the range of node numbers IN0 to IN7<br />

and OUT0 to OUT7 is set, and node number 0 is used, data will be input from<br />

bits 00 to 07 of word n (Output Slave 0) and output to bits 00 to 07 of word n +<br />

4 (Input Slave 0).<br />

Note Input word bits 08 and 09 of the CPM2C CPU Unit are used by the I/O Link<br />

Unit for CPM2C. As an Output Slave of the Master CPU Unit, only 8 points are<br />

allocated.<br />

5-11 Sensor Amplifier Terminals<br />

5-11-1 SRT1-T@D04S Sensor Amplifier Terminals<br />

Combinations<br />

CPU Unit<br />

Because node number is 0*<br />

I/O Memory<br />

Output<br />

IR 2000 (n)<br />

Input<br />

IR 2004<br />

(n+4)<br />

8 points<br />

8 points<br />

*: For node numbers IN0 to IN7/OUT0 to OUT7<br />

Sensor Amplifier Communications Terminals<br />

4 input points<br />

(1 channel × 4 units)<br />

4 input points<br />

(4 channels × 1 unit)<br />

Master PLC (CS Series)<br />

<strong>CompoBus</strong>/S<br />

Master Unit No. 0<br />

Output Slave 0<br />

Input Slave 0<br />

<strong>CompoBus</strong>/S Network<br />

Node number is 0 CPM2C<br />

I/O Link Unit for<br />

CPM2C I/O Link<br />

Unit<br />

Connector Units (1 Channel Input)<br />

Sensor Amplifier Expansion Terminals Connecting Unit (4 Channels Input)<br />

Input<br />

4 input points<br />

(1 channel × 4 units)<br />

4 input points<br />

(4 channels × 1 unit)<br />

Input Model<br />

SRT1-TID04S<br />

SRT1-TKD04S<br />

Model<br />

SRT1-XID04S<br />

SRT1-XKD04S<br />

20-point I/O CPU Unit<br />

I/O Memory<br />

8 points<br />

8 points<br />

Input<br />

IR 001<br />

Output<br />

IR 011<br />

Input Specifications Model<br />

E3X-N Connector General-purpose,<br />

1 channel<br />

Terminal Block Unit<br />

Multi-function,<br />

1 channel<br />

1 input point<br />

Input<br />

Specifications<br />

E3X-N Connector Multi-function,<br />

1 channel<br />

E3X-NT16<br />

E3X-NT26<br />

E39-JID01<br />

Model<br />

E3X-NM16<br />

335

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!