OPERATION MANUAL CompoBus/S

Water-resistant Terminals Section 5-4
Communications Cable, I/O Power Supply, and I/O Wiring
Communications Cable Wiring
Use the following connectors to connect the communications cable.
Connectors
Type Model
Connector Socket Assembly (female) XS2C-D4S7
(Crimp terminals/Solder terminals)
Connector Plug Assembly (male) XS2G-D4S7
(Crimp terminals/Solder terminals)
T-joint XS2R-D427-5
XS2C-D4S7 Connector
Socket Assembly
(female)
XS2G-D4S7
Connector Plug
Assembly (male)
XS2R-D427-5 T-joint
SRT2-ID04CL
XS2G-D4S7
Connector Plug
Assembly (male)
4-conductor VCTF cable
4-conductor VCTF cable
XS2C-D4S7 Connector
Socket Assembly
(female)
XS2C-D4S7 Connector
Socket Assembly
(female)
XS2G-D4S7
Connector Plug
Assembly (male)
XS2R-D427-5 T-joint
SRT2-ID08CL
XS2G-D4S7
Connector Plug
Assembly (male)
4-conductor VCTF cable
XS2C-D4S7 Connector
Socket Assembly
(female)
Note Tighten the connector securely by hand to a torque of 0.39 to 0.49 N⋅m. If the
connector is not tightened securely, the connector will be loosened or cannot
maintain the enclosure rating. Do not tighten the connector with tools such as
pliers, or otherwise the connector may be broken.
I/O Power Supply Wiring
Use the following XS2-series Round Water-resistant Connectors to wire I/O
power supply.
Connectors
Type Model
Connectors with Cable (Socket and Plug) XS2W-D42@-@81-@
Connector with Cable (Female socket on
one end)
XS2F-D42@-@80-@
T-joint XS2R-D427-5
I/O power supply
XS2F-D42-80- Round
Water-resistant Connector with
Cable (socket on one end)
SRT2-ID04CL SRT2-ID08CL
XS2R-D427-5 T-joint
I/O power supply
XS2W-D42-81-
Round Water-resistant
Connectors with Cable
(socket and plug)
XS2R-D427-5 T-joint
XS2W-D42-81- Round
Water-resistant Connectors
with Cable (socket and plug)
275