OPERATION MANUAL CompoBus/S

Connector Terminals Section 5-2
Is the input power supply
voltage 20.4 to 26.4 V DC?
Yes
Do input specifications agree?
Yes
What is the size of the
conductors in the cable?
0.3 to 0.5 mm 2
Compatible
Use an XS8A-0441 Connector to
connect the sensor.
No
No
Incompatible
Incompatible
0.14 to 0.2 mm 2
Compatible
Use an XS8A-0442 Connector to
connect the sensor.
Note 1. The size of the sensor cable conductor is calculated as below.
Conductor description of sensor cable:
φ Outside diameter of cable (number of wires/wire diameter)
conductor size (mm 2 )
= (wire diameter/2) 2 × π × number of wires
Example: E3S-A Sensor
Incompatible
φ 4 (18/0.12) → Conductor size (mm2 )
= (0.12/2) 2 × 3.14 × 18 = 0.20
Since the conductor size works out to be 0.2 mm2 , use XS8A-0442 Connector.
2. The XS8A-0441 and XS8A-0442 Connectors are not provided with the
Unit. The Connectors must be ordered separately.
Models with MIL Connectors (SRT2-VID16ML-1)
The MIL Connector can be connected to external devices using either of the
following methods.
1,2,3... 1. Using an XG4A-2030-T MIL Connector (sold separately) to Assemble Your
Own Cable
For details, refer to MIL Connector Wiring and Assembly on page 258.
Insert with protrusion
facing right.
Other
205