OPERATION MANUAL CompoBus/S

I/O Response Time Characteristics Section 2-5
Long-distance Communications Mode: 110 µs
T I/O: I/O refreshing time
CS-series, C200HX/C200HG/C200HE-(Z)E, and C200HS Master
Units
PLC Usable node number setting
CS-series Master Units
Note 1. The values in the above table are applicable when connected
to the CPU Rack. Add another 20 µs to the values
shown in the table when connecting to an
Expansion Rack.
2. Add another 20 µs to the values shown in the table
when using the Slave registration function or communications
stop mode.
CJ-series Master Units
IN0 to IN7 and
OUT0 to OUT7
IN0 to IN15 and
OUT0 to OUT15
CS Series, and C200HX/
C200HG/ C200HE-(Z)E
TI/O = 440 µs TI/O = 880 µs
C200HS TI/O = 1,000 µs TI/O = 2,000 µs
PLC Usable node number setting
IN0 to IN7 and
OUT0 to OUT7
IN0 to IN15 and
OUT0 to OUT15
CS1 (without -H suffix) TI/O = 160 µs TI/O = 180 µs
CS1-H TI/O = 120 µs TI/O = 130 µs
PLC Usable node number setting
IN0 to IN7 and
OUT0 to OUT7
IN0 to IN15 and
OUT0 to OUT15
CJ1 (without -H suffix) TI/O = 160 µs TI/O = 180 µs
CJ1-H TI/O = 120 µs TI/O = 130 µs
Note 1. The values in the above table are applicable when connected
to the CPU Rack. Add another 20 µs to the values
shown in the table when connecting to an
Expansion Rack.
2. Add another 20 µs to the values shown in the table
when using the Slave registration function or communications
stop mode.
CQM1 Master Units
PLC PLC word allocation setting
2 words 4 words 8 words
CQM1 TI/O = 15 µs TI/O = 30 µs TI/O = 60 µs
43