cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 101/274
5.7.6 Deinstalling CIFX 100EH-RE\CUBE
To deinstall the CIFX 100EH-RE\CUBE Communication Interface PCI-
Express handle as follows:
1. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
• Disconnect the power plug of the PC or of the connecting device.
• Make sure, that the power supply is off at the PC or at the connecting
device.
2. Remove the connecting cable to the Master or Slave.
‣ Remove the connecting cable between the CIFX 100EH-RE\CUBE
Communication Interface to be replaced and the PC card Real-Time
Ethernet Master or Slave.
3. Open cabinet.
‣ Open the cabinet of the PC or of the connecting device.
4. Deinstall CIFX 100EH-RE\CUBE Communication Interface.
‣ Loosen the CIFX 100EH-RE\CUBE.
‣ Remove the CIFX 100EH-RE\CUBE from the PCI express slot.
After this:
5. Close cabinet.
‣ Close the cabinet of the PC or connecting device.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011