cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 114/274
Connecting the AIFX-RE
Important! Pre-requirement for the operation of the CIFX 104C-RE\F and
CIFX 104C-RE-R\F Communication Interface is, that the assembly
interface Ethernet (AIFX-RE) is connected!
5. Connect the assembly interface Ethernet (AIFX-RE).
‣ Connect the cable connector Ethernet X1 on the AIFX-RE with the
cable.
Figure 25: Connect the cable connector Ethernet X1 on the AIFX-RE with the cable.
‣ Connect the cable connector Ethernet X4 (or X304) on the CIFX 104C-
RE\F Communication Interface with the cable.
Figure 26: Connect the cable connector Ethernet X304 on the CIFX 104C-RE\F* with the
cable. (*Example in this figure)
‣ Install the AIFX-RE on the front plate of the CIFX 104C-RE\F.
For more see next page.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011