cifX Communication Interfaces Real-Time Ethernet - Hilscher

Software Installation 172/274
6.4 Installing cifX Communication Interface PC/104 (ISA) –
Windows 7
Precondition: The cifX Device Driver was already installed on the used
PC. If this is not the case yet, then run the setup program cifX Device
Driver Setup.exe. This setup program installs the driver and the required
INF files.
Note: To operate a cifX Communication Interface PC/104 (ISA) in a PC,
the PC has to provide a free ISA memory area of 16 Kbyte in the memory
range C0000 bis FBFFF. If the cifX should be operated with interrupt, then
the PC has to provide additionally a free ISA interrupt.
Do the following steps to install a cifX Communication Interface PC/104
(ISA), e. g. to reserve the memory range and if necessary one interrupt at
the operating system for the card:
1. Open Start
‣ Click on Start .
2. Search and start the Device Manager.
‣ Enter Device Manager into the search field.
‣ Click on Device Manager.
The Device Manager starts.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011