cifX Communication Interfaces Real-Time Ethernet - Hilscher
cifX Communication Interfaces Real-Time Ethernet - Hilscher
cifX Communication Interfaces Real-Time Ethernet - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety 33/274<br />
2.8 Property Damage Messages<br />
To avoid property damage respectively device destruction to the PC card<br />
(<strong>cifX</strong> <strong>Communication</strong> Interface) and to your system, you necessarily must<br />
read, understand and follow the following and all other property damage<br />
messages in this manual, before you install and operate your PC card.<br />
2.8.1 Device Destruction by exceeding allowed Supply Voltage<br />
Adhere for all <strong>cifX</strong> <strong>Communication</strong> <strong>Interfaces</strong> described in this manual the<br />
instruction hereafter:<br />
NOTICE<br />
Device Destruction!<br />
• Use only the mandatory supply voltage to operate the <strong>cifX</strong> <strong>Communication</strong><br />
Interface.<br />
• Operating the <strong>cifX</strong> with a supply voltage above of the specified range<br />
leads to device destruction.<br />
USA:<br />
Device Destruction!<br />
• Use only the mandatory supply voltage to operate the <strong>cifX</strong> <strong>Communication</strong><br />
Interface.<br />
• Operating the <strong>cifX</strong> with a supply voltage above of the specified range<br />
leads to device destruction.<br />
The <strong>cifX</strong> <strong>Communication</strong> Interface may only be operated with the specified<br />
supply voltage. Make sure that the limits of the allowed range for the supply<br />
voltage are not exceeded. A supply voltage above the upper limit can<br />
cause severe damage to the <strong>cifX</strong> <strong>Communication</strong> Interface! A supply<br />
voltage below the lower limit can cause malfunction in the <strong>cifX</strong><br />
<strong>Communication</strong> Interface. The allowed range for the supply voltage is<br />
defined by the tolerances specified in this manual.<br />
For the PC cards listed hereafter adhere specifically: The <strong>cifX</strong><br />
<strong>Communication</strong> Interface<br />
• CIFX 50-RE<br />
• CIFX 50E-RE<br />
• CIFX 80-RE<br />
• CIFX 90-RE\F<br />
• CIFX 90E-RE\F<br />
• CIFX 100EH-RE\CUBE<br />
may not be powered by a 5V supply voltage! The <strong>cifX</strong> <strong>Communication</strong><br />
Interface may only be powered by a 3.3 V ±5 % supply voltage.<br />
The data on the mandatory supply voltage for the <strong>cifX</strong> <strong>Communication</strong><br />
<strong>Interfaces</strong> described in this manual you find in the section Supply Voltage<br />
and Signal Voltage on page 44. There the required and permitted supply<br />
voltage is provided by device type inclusively the permitted tolerance<br />
range.<br />
<strong>cifX</strong> <strong>Communication</strong> <strong>Interfaces</strong> <strong>Ethernet</strong> | Installation, Operation and Hardware Description<br />
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © <strong>Hilscher</strong>, 2006-2011
Change language