cifX Communication Interfaces Real-Time Ethernet - Hilscher

Software Installation 147/274
6 Software Installation
6.1 System Overview
6.1.1 Configuration and Diagnosis
The following system overviews show which system components must be
installed on the PC and how they communicate together to configure the
cifX Communication Interface and to use the diagnosis functions.
cifX Communication Interface with Master Protocol
If on the cifX Communication Interface a Real-Time Ethernet protocol or a
fieldbus protocol with Master functionality is operated, the configuration and
the diagnosis of the cifX Communication Interface are done with
SYCON.net.
The following software components are required:
• Configuration and diagnosis program SYCON.net (contains the installed
component Online Data Manager ODMV3)
• Device Driver (cifX Device Driver)
Figure 49: System Overview cifX and SYCON.net
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011