cifX Communication Interfaces Real-Time Ethernet - Hilscher

Software Installation 194/274
6.7 Slot Number (Card ID) in the cifX Device Driver Setup
This section describes how the Slot Number (Card ID) is displayed in the
cifX Device Driver setup program.
Precondition: Previously a Slot Number (Card ID) between 1 and 9 has
been set at the cifX Communication Interface (refer to section PCI and PCI
Express: Setting Slot Number (Card ID), on page 67).
The description below uses for Slot Number (Card ID) the value „1“.
1. Open the cifX Setup program in the control panel.
‣ Select Start > Control Panel.
‣ Double click on the cifX Setup symbol.
The cifX Driver setup program starts.
2. Select cifX.
‣ Select under Device List > Active Devices the entry cifX0 or cifX1.
The field Slot Number shows the Slot Number (Card ID) for the cifX
Communication Interface. For this description the Slot Number (Card
ID) has the value „1“.
Figure 68: Slot Number (Card ID) in the cifX Device Driver Setup
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011