cifX Communication Interfaces Real-Time Ethernet - Hilscher

LED Descriptions 208/274
8.8 Powerlink Controlled Node/Slave
The subsequent table describes the meaning of the LEDs for the cifX
Communication Interface Real-Time Ethernet (Slave) when the firmware of
the Powerlink Controlled Node/Slave protocol is loaded to the device.
LED Color State Meaning
BS Duo LED red/green
Name in
Off
Slave initializing
(off)
the device
drawing:
Flickering Slave is in Basic Ethernet state
COM 0 (green)
Single Slave is in Pre-Operational 1
Flash
Double Slave is in Pre-Operational 2
Flash
Triple Flash Slave is in ReadyToOperate
On
Slave is Operational
Blinking Slave is Stopped
BE Duo LED red/green
Name in
Off
Slave has no error
(off)
the device
drawing: (red) On Slave has detected an error
COM 1
L/A/ LED green
RJ45
Ch0 & Ch1
(green)
On
Link: A connection to the Ethernet exists
Flashing Activity: The device sends/receives Ethernet frames
(green)
(off)
Off
The device has no connection to the Ethernet
RJ45 LED yellow
Ch0 & Ch1
- - This LED is not used.
Table 57: LEDs Powerlink Controlled Node/Slave
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011