cifX Communication Interfaces Real-Time Ethernet - Hilscher

LED Descriptions 210/274
8.9 PROFINET IO-RT Controller
The subsequent table describes the meaning of the LEDs for the cifX
Communication Interface Real-Time Ethernet (Master) when the firmware
of the PROFINET IO-RT Controller protocol is loaded to the device.
LED Color State Meaning
SF
Duo LED red/green
Name in the
device
drawing:
COM 0
BF
Name in the
device
drawing:
COM 1
LINK/RJ45
Ch0 & Ch1
RX/TX/RJ45
Ch0 & Ch1
(red) On (together with BF „red ON“)
No valid Master license
(red) Flashing System error: Invalid configuration
cyclic at 2 Hz
(off)
Off
No error
Duo LED red/green
(red) On No Connection: No Link.
or (together with SF „red ON“)
No valid Master license
(red) Flashing
cyclic at 2 Hz
Off
(off)
LED green
On
(green)
Off
(off)
LED yellow
(yellow)
Flashing
Table 59: LEDs PROFINET IO-RT Controller
Configuration fault: not all configured IO-Devices are
connected.
No error
A connection to the Ethernet exists
The device has no connection to the Ethernet
The device sends/receives Ethernet frames
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011