cifX Communication Interfaces Real-Time Ethernet - Hilscher

Lists 262/274
12 Lists
12.1 List of Figures
Figure 1: System Overview cifX to update Firmware, Driver and Software 63
Figure 2: Device Drawing CIFX 50-RE (hardware revision 3, with Rotary Switch Slot Number (Card ID)) 68
Figure 3: Device Drawing CIFX 50-RE (up to hardware revision 2) 68
Figure 4: Device Drawing CIFX 50E-RE (hardware revision 4, with Rotary Switch Slot Number (Card ID)) 69
Figure 5: Device Drawing CIFX 50E-RE (up to hardware revision 3) 69
Figure 6: Front Plate Stickers for CIFX 50-RE and CIFX 50E-RE to label the LEDs (6 different stickers) 71
Figure 7: Device Drawing CIFX 80-RE 77
Figure 8: Front Plate Stickers for CIFX 80-RE to label the LEDs (6 different stickers) 78
Figure 9: Device Drawing CIFX 90-RE\F 83
Figure 10: Device Drawing CIFX 90E-RE\F 84
Figure 11: Plug the CIFX 90E-RE\F Communication Interface into the PCI Express Mini System Connector
on the mainboard and press down the cifX until it snaps into place. 86
Figure 12: Connect the cable connector Ethernet X1 on the AIFX-RE with the cable. 87
Figure 13: Connect the cable connector Ethernet X4 on the CIFX 90E-RE\F* with the cable. (*Example in this
figure) 87
Figure 14: Unplug the cable from the cable connector Ethernet X4 on the CIFX 90E-RE\F* (*Example in this
figure) 89
Figure 15: Press down the fastening clips (red arrows) of the CIFX 90E-RE\F, until the cifX flips up. 90
Figure 16: Unplug the cable from the cable connector Ethernet X4 on the CIFX 90E-RE\F*. (*Example in this
figure) 91
Figure 17: Press down the fastening clips (red arrows) of the CIFX 90E-RE\F, until the cifX flips up. 92
Figure 18: Connect the cable connector Ethernet X4 on the CIFX 90E-RE\F* with the cable. (*Example in this
figure) 93
Figure 19: Device Drawing CIFX 100EH-RE\CUBE 94
Figure 20: Front Plate Stickers for CIFX 100EH-RE\CUBE to label the LEDs (6 different stickers, each with
two parts) 96
Figure 21: Device Drawing CIFX 104C-RE 104
Figure 22: Device Drawing CIFX 104C-RE-R 105
Figure 23: Device Drawing CIFX 104C-RE\F 111
Figure 24: Device Drawing CIFX 104C-RE-R\F 112
Figure 25: Connect the cable connector Ethernet X1 on the AIFX-RE with the cable. 114
Figure 26: Connect the cable connector Ethernet X304 on the CIFX 104C-RE\F* with the cable. (*Example in
this figure) 114
Figure 27: Connect the cable connector DIAG X1 on the AIFX-DIAG with the cable. 115
Figure 28: Connect the cable connector DIAG X303 on the CIFX 104C-RE\F* with the cable. (*Example in
this figure) 115
Figure 29: Unplug the cable from the cable connector Ethernet X304 on the CIFX 104C-RE\F*. (*Example in
this figure) 117
Figure 30: Unplug the cable from the cable connector DIAG X303 on the CIFX 104C-RE\F*. (*Example in
this figure) 118
Figure 31: Unplug the cable from the cable connector Ethernet X304 on the CIFX 104C-RE\F*. (*Example in
this figure) 120
Figure 32: Unplug the cable from the cable connector DIAG X303 on the CIFX 104C-RE\F*. (*Example in
this figure) 120
Figure 33: Connect the cable connector Ethernet X304 on the Replacement CIFX 104C-RE\F* with the
cable. (*Example in this figure) 122
Figure 34: Connect the cable connector DIAG X303 on the Replacement CIFX 104-RE\F* with the cable.
(*Example in this figure) 123
Figure 35: Device Drawing CIFX 104-RE 126
Figure 36: Device Drawing CIFX 104-RE-R 127
Figure 37: Device Drawing CIFX 104-RE\F 133
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011