cifX Communication Interfaces Real-Time Ethernet - Hilscher

Technical Data 251/274
10.3.4 EtherNet/IP Adapter (Slave)
Parameter
Description
Maximum number of input data
504 bytes
Maximum number of output data
504 bytes
IO Connection
1 explicit owner, up to 2 listen only
IO Connection type
Cyclic, minimum 1 ms
Explicit Messages
Get_Attribute, Set_Attribute
UCMM
Supported
Maximum number of user specific objects 20
Maximum number of connections
8, explicit and implicit connections
Predefined standard objects
Identity Object
Message Route Object
Assembly Object
Connection Manager
Ethernet Link Object
TCP/IP Object
Topology
Tree, Line, Ring
DLR (Device Level Ring)
Beacon based ’Ring Node’
ACD (Address Conflict Detection)
Supported
DHCP
Supported
BOOTP
Supported
Baud rates
10 and 100 MBit/s
Data transport layer Ethernet II, IEEE 802.3
Integrated switch
Supported
Limitations
CIP Sync Services are not implemented
TAGs are not supported
Reference to firmware/stack version
V2.5.x.x
Table 100: Technical Data EtherNet/IP Adapter (Slave) Protocol
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011