11.01.2014 Views

cifX Communication Interfaces Real-Time Ethernet - Hilscher

cifX Communication Interfaces Real-Time Ethernet - Hilscher

cifX Communication Interfaces Real-Time Ethernet - Hilscher

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

LED Descriptions 214/274<br />

8.12 SERCOS III Slave<br />

The subsequent table describes the meaning of the LEDs for the <strong>cifX</strong><br />

<strong>Communication</strong> Interface <strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> Slave when the firmware of<br />

the SERCOS III Slave protocol is loaded to the device.<br />

LED Color State Meaning<br />

STA Duo LED red/green/orange (orange = red/green simultaneously)<br />

Name in<br />

the device<br />

drawing:<br />

COM 0<br />

Name in<br />

the device<br />

drawing:<br />

COM 1<br />

L/A/RJ45<br />

Ch0 & Ch1<br />

RJ45<br />

Ch0 & Ch1<br />

(green)<br />

(green)<br />

(red/<br />

green)<br />

On CP4: <strong>Communication</strong> phase 4,<br />

Normal operation, no error<br />

Flashing (4 Hz) Loopback: The network state has changed from „fastforward“<br />

to „loopback“.<br />

Flashing (4 Hz),<br />

The LED<br />

flashes at least<br />

for 2 seconds<br />

from red to<br />

green.<br />

<strong>Communication</strong> Error: Depends on IDN S-0-1003<br />

(for details refer to SERCOS III Slave Protocol<br />

API.pdf on the product DVD).<br />

Shows how long the Master may in the communication<br />

phases CP3 and CP4 not received Master SYNC<br />

telegrams.<br />

(red) On SIII C1D:<br />

Error detected according to Sercos III Cass 1 Diagnosis.<br />

On<br />

CP0 … CP3:<br />

(orange)<br />

<strong>Communication</strong> phase 0 to <strong>Communication</strong> phase 3<br />

Flashing (4 Hz) Identification: Bit 15 in the Slave device control that<br />

(orange)<br />

indicates remote address allocation or configuration<br />

errors between Master and Slaves (for details refer to<br />

SERCOS III Slave Protocol API.pdf on the<br />

product DVD).<br />

(off)<br />

Off<br />

No SERCOS III <strong>Communication</strong><br />

Duo LED red/green<br />

- - This LED is not used.<br />

LED green<br />

On<br />

Link: A connection to the <strong>Ethernet</strong> exists<br />

(green)<br />

Flashing Activity: The device sends/receives <strong>Ethernet</strong> frames<br />

(green)<br />

(off)<br />

Off<br />

The device has no connection to the <strong>Ethernet</strong><br />

LED yellow<br />

- - This LED is not used.<br />

Table 63: LEDs SERCOS III Slave<br />

LED State Definition for SERCOS III Slave for the S3 LED<br />

Indicator state<br />

On<br />

Off<br />

Flashing (4 Hz)<br />

Definition<br />

The indicator is constantly on.<br />

The indicator is constantly off.<br />

The indicator turns on and off with a frequency of 4 Hz: on for<br />

appr. 125 ms, followed by off for appr. 125 ms.<br />

Table 64: LED State Definition for SERCOS III Slave for the S3 LED<br />

<strong>cifX</strong> <strong>Communication</strong> <strong>Interfaces</strong> <strong>Ethernet</strong> | Installation, Operation and Hardware Description<br />

DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © <strong>Hilscher</strong>, 2006-2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!