cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 144/274
Remove cifX e to be replaced
7. Remove CIFX 104-RE\F Communication Interface.
‣ Loosen the four fastening screws of the CIFX 104-RE\F.
‣ Remove the CIFX 104-RE\F.
Install Replacement cifX
8. Install the replacement CIFX 104-RE\F.
‣ Plug the replacement CIFX 104-RE\F into a free PC/104 slot (or if so, to
the underlying cifX).
‣ Fix the replacement CIFX 104-RE\F using 4 spacing bolts and screws
intended to the mainboard (or if so, to the underlying cifX). The scope of
delivery does not include spacing bolts and screws.
Note: First connect the AIFX-RE to each CIFX 104-RE\F Communication
Interface, before plugging another module. Just so you can check exactly
whether the AIFX is properly connected to the cifX.
For more see next page.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011