11.01.2014 Views

cifX Communication Interfaces Real-Time Ethernet - Hilscher

cifX Communication Interfaces Real-Time Ethernet - Hilscher

cifX Communication Interfaces Real-Time Ethernet - Hilscher

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Technical Data 244/274<br />

10.1.7 CIFX 104C-RE, CIFX 104C-RE-R, CIFX 104C-RE\F, CIFX 104C-<br />

RE-R\F<br />

Item<br />

CIFX 104C-RE, CIFX 104C-RE-R,<br />

CIFX 104C-RE\F, CIFX 104C-RE-R\F<br />

System Interface<br />

PCI 104, according to [bus spec 7], refer to section Overview on the Pin<br />

(Bus Type)<br />

Assignment at the Bus, page 230,<br />

32-Bit width for the data access to the Dual-Port Memory (DPM), or DMA<br />

(Direct Memory Access)<br />

Dual-Port Memory Size<br />

64 KBytes<br />

Function<br />

<strong>Communication</strong> interface with PCI 104 and <strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> interface<br />

<strong>Communication</strong><br />

Determined by the loaded firmware<br />

Protocols<br />

EtherCAT Master, EtherCAT Slave,<br />

EtherNet/IP-Scanner (Master), EtherNet/IP-Adapter (Slave), Open<br />

Modbus/TCP,<br />

Powerlink Controlled Node/Slave,<br />

PROFINET IO-Controller, PROFINET IO-Device,<br />

SERCOS III Master, SERCOS III Slave<br />

<strong>Ethernet</strong> Frame Types<br />

<strong>Ethernet</strong> II<br />

Processor netX 500<br />

LEDs<br />

SYS, COM 0, COM 1, 2x Link, 2x Activity;<br />

refer also to chapter LED Descriptions, page 200.<br />

Configuration Software<br />

SYCON.net<br />

<strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> Master<br />

Configuration Software<br />

netX Configuration Tool or SYCON.net<br />

<strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> Slave<br />

Transmission Rate 10/100 MBit/s, Auto-Negotiation, Auto-Cross-Over, Halfduplex/Fullduplex (100<br />

MBit/s)<br />

Depending on used firmware<br />

<strong>Ethernet</strong> Interface<br />

For CIFX 104C-RE, CIFX 104C-RE-R:<br />

RJ45 Socket, 10 Base-T, 100 Base-TX, potential free;<br />

refer also to section <strong>Ethernet</strong> Interface, page 219.<br />

Interface AIFX-RE For CIFX 104C-RE\F, CIFX 104C-RE-R\F :<br />

Cable Connector <strong>Ethernet</strong> for connecting AIFX-RE;<br />

refer also to section Assembly Interface , page 215.<br />

Assembly Interface For CIFX 104C-RE\F, CIFX 104C-RE-R\F :<br />

Cable Connector DIAG; refer also to section Assembly Interface Diagnostic<br />

(AIFX- DIAG), page 217.<br />

USB Interface<br />

For CIFX 104C-RE*, CIFX 104C-RE-R* and<br />

for CIFX 104C-RE\F*, CIFX 104C-RE-R\F*<br />

when the AIFX-DIAG is used.<br />

Mini B USB Plug (5 pin) ; refer also to section Mini-B USB Connector (5 Pin),<br />

page 221.<br />

Note! Currently any <strong>cifX</strong> firmware that supports USB can be provided.<br />

(*Can only be used for future hardware revisions of the <strong>cifX</strong> <strong>Communication</strong><br />

Interface.)<br />

Supply Voltage<br />

+5 V dc ±5 %/Typ. 500 mA or<br />

+3.3 V dc ±5 %/Typ. 730 mA<br />

Dimensions (L x W x D)<br />

97 x 91 x 24 mm<br />

Operating Temperature -20 °C ... +70 °C<br />

Environment<br />

The device must be used in a pollution degree 2 environment.<br />

UL Certification<br />

The device is UL 508 certified (UL-File No E221530).<br />

Table 92: Technical Data CIFX 104C-RE, CIFX 104C-RE-R, CIFX 104C-RE\F, CIFX 104C-<br />

RE-R\F<br />

<strong>cifX</strong> <strong>Communication</strong> <strong>Interfaces</strong> <strong>Ethernet</strong> | Installation, Operation and Hardware Description<br />

DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © <strong>Hilscher</strong>, 2006-2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!