cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 130/274
5.11.4 Deinstalling CIFX 104-RE and CIFX 104-RE-R
To deinstall the
• CIFX 104-RE Communication Interface PC/104 and
• CIFX 104-RE-R Communication Interface PC/104
handle as follows:
1. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
• Disconnect the power plug of the PC or of the connecting device.
• Make sure, that the power supply is off at the PC or at the connecting
device.
2. Remove the connecting cable to the Master or Slave.
‣ Remove the connecting cable between the CIFX 104-RE Communication
Interface to be replaced and the PC card Real-Time Ethernet
Master or Slave.
3. Open cabinet.
‣ Open the cabinet of the PC or of the connecting device.
Note: If a CIFX 104-RE Communication Interface shall be deinstalled from
a stack of such modules:
(a) Remove all modules above from the cifX to be replaced and the cifX to
be replaced.
(b) Reinstall the removed modules.
4. Remove CIFX 104-RE Communication Interface.
‣ Loosen the four fastening screws of the CIFX 104-RE.
‣ Remove the CIFX 104-RE.
After this:
5. Close cabinet.
‣ Close the cabinet of the PC or connecting device.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011