cifX Communication Interfaces Real-Time Ethernet - Hilscher
cifX Communication Interfaces Real-Time Ethernet - Hilscher
cifX Communication Interfaces Real-Time Ethernet - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Data 245/274<br />
10.1.8 CIFX 104-RE, CIFX 104-RE-R, CIFX 104-RE\F, CIFX 104-RE-R\F<br />
Item<br />
System Interface<br />
(Bus Type)<br />
Dual-Port Memory Size<br />
Function<br />
<strong>Communication</strong><br />
Protocols<br />
<strong>Ethernet</strong> Frame Types<br />
CIFX 104-RE, CIFX 104-RE-R,<br />
CIFX 104-RE\F, CIFX 104-RE-R\F<br />
PC/104, refer to section Overview on the Pin Assignment at the Bus, page 230<br />
and Pin Assignment for PC/104 Bus, page 236,<br />
32-Bit Dual-Port-Memory<br />
16 KBytes<br />
<strong>Communication</strong> interface with PC/104 and <strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> interface<br />
Determined by the loaded firmware<br />
EtherCAT Master, EtherCAT Slave,<br />
EtherNet/IP-Scanner (Master), EtherNet/IP-Adapter (Slave), Open<br />
Modbus/TCP,<br />
Powerlink Controlled Node/Slave,<br />
PROFINET IO-Controller, PROFINET IO-Device,<br />
SERCOS III Master, SERCOS III Slave<br />
<strong>Ethernet</strong> II<br />
Processor netX 100<br />
LEDs<br />
SYS, COM 0, COM 1, 2x Link, 2x Activity;<br />
refer also to chapter LED Descriptions, page 200.<br />
Configuration Software<br />
SYCON.net<br />
<strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> Master<br />
Configuration Software<br />
netX Configuration Tool or SYCON.net<br />
<strong>Real</strong>-<strong>Time</strong> <strong>Ethernet</strong> Slave<br />
Transmission Rate 10/100 MBit/s, Auto-Negotiation, Auto-Cross-Over, Halfduplex/Fullduplex (100<br />
MBit/s)<br />
Depending on used firmware<br />
<strong>Ethernet</strong> Interface<br />
For CIFX 104-RE, CIFX 104-RE-R:<br />
RJ45 Socket, 10 Base-T, 100 Base-TX, potential free;<br />
refer also to section <strong>Ethernet</strong> Interface, page 219.<br />
Interface AIFX-RE For CIFX 104-RE\F, CIFX 104-RE-R\F :<br />
Cable Connector <strong>Ethernet</strong> for connecting AIFX-RE;<br />
refer also to section Assembly Interface , page 215.<br />
Diagnostic Interface For CIFX 104-RE\F, CIFX 104-RE-R\F :<br />
Cable Connector DIAG; refer also to section Assembly Interface Diagnostic<br />
(AIFX- DIAG), page 217.<br />
USB Interface<br />
For CIFX 104-RE, CIFX 104-RE-R and<br />
for CIFX 104-RE\F, CIFX 104-RE-R\F<br />
when the AIFX-DIAG is used.<br />
Mini B USB Plug (5 pin) ; refer also to section Mini-B USB Connector (5 Pin),<br />
page 221.<br />
Note! Currently any <strong>cifX</strong> firmware that supports USB can be provided.<br />
Supply Voltage<br />
+5 V ±5 %/Typ. 500 mA<br />
Dimensions (L x W x D)<br />
97 x 91 x 24 mm<br />
Operating Temperature -20 °C ... +70 °C<br />
Environment<br />
The device must be used in a pollution degree 2 environment.<br />
UL Certification<br />
The device is UL 508 certified (UL-File No E221530).<br />
Table 93: Technical Data CIFX 104-RE, CIFX 104-RE-R, CIFX 104-RE\F, CIFX 104-RE-R\F<br />
<strong>cifX</strong> <strong>Communication</strong> <strong>Interfaces</strong> <strong>Ethernet</strong> | Installation, Operation and Hardware Description<br />
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © <strong>Hilscher</strong>, 2006-2011