cifX Communication Interfaces Real-Time Ethernet - Hilscher

LED Descriptions 213/274
LED State Definition for SERCOS III Master for the STA and ERR LEDs
Indicator state
Off
Blinking
Single Flickering
Flickering
Single Flash
Double Flash
Triple Flash
Quadruple Flash
Definition
The indicator is constantly off.
The indicator turns on and off with a frequency of 2,5 Hz: on for
200 ms, followed by off for 200 ms.
The indicator turns on and off with a frequency of approximately
10 Hz: on for approximately 50 ms, followed by off for 50 ms.
The indicator turns on and off once: on for approximately 50 ms,
followed by off for 50 ms.
The indicator shows one short flash (200 ms) followed by a long
off phase (1,000 ms).
The indicator shows a sequence of two short flashes (each
200 ms), separated by a short off phase (200 ms). The sequence
is finished by a long off phase (1,000 ms).
The indicator shows a sequence of three short flashes (each
200 ms), separated by a short off phase (200 ms). The sequence
is finished by a long off phase (1,000 ms).
The indicator shows a sequence of four short flashes (each
200 ms), separated by a short off phase (200 ms). The sequence
is finished by a long off phase (1,000 ms).
Table 62: LED State Definition for SERCOS III Master for the STA and ERR LEDs
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011