cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 117/274
5.9.4 Deinstalling CIFX 104C-RE\F and CIFX 104C-RE-R\F
To deinstall the
• CIFX 104C-RE\F Communication Interface PCI 104(„\F“) and
• CIFX 104C-RE-R\F Communication Interface PCI 104(„\F“)
handle as follows:
1. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
• Disconnect the power plug of the PC or of the connecting device.
• Make sure, that the power supply is off at the PC or at the connecting
device.
2. Remove the connecting cable to the Master or Slave.
‣ Remove the connecting cable between the CIFX 104C-RE\F
Communication Interface to be replaced and the PC card Real-Time
Ethernet Master or Slave.
3. Open cabinet.
‣ Open the cabinet of the PC or of the connecting device.
Deinstall AIFX-RE and AIFX-DIAG
4. Deinstall assembly interface Ethernet (AIFX-RE) and the assembly
interface diagnostic (AIFX-DIAG):
‣ Remove the AIFX-RE and the AIFX-DIAG from the front plate of the
CIFX 104C-RE\F Communication Interface.
‣ Unplug the cable from the cable connector Ethernet X4 (or X304) on the
CIFX 104C-RE\F Communication Interface.
Figure 29: Unplug the cable from the cable connector Ethernet X304 on the CIFX 104C-
RE\F*. (*Example in this figure)
For more see next page.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011