cifX Communication Interfaces Real-Time Ethernet - Hilscher

Technical Data 240/274
10.1.3 CIFX 80-RE
Item
System Interface
(Bus Type)
Dual-Port Memory Size
Function
Communication
Protocols
Ethernet Frame Types
CIFX 80-RE
Compact PCI, according to [bus spec 4], refer to section Overview on the Pin
Assignment at the Bus, page 230,
32-Bit width for the data access to the Dual-Port Memory (DPM), or DMA
(Direct Memory Access)
64 KBytes
Communication interface with Compact PCI and Real-Time Ethernet interface
Determined by the loaded firmware
EtherCAT Master, EtherCAT Slave,
EtherNet/IP-Scanner (Master), EtherNet/IP-Adapter (Slave), Open
Modbus/TCP,
Powerlink Controlled Node/Slave,
PROFINET IO-Controller, PROFINET IO-Device,
SERCOS III Master, SERCOS III Slave
Ethernet II
Processor netX 100
LEDs
SYS, COM 0, COM 1, 2x Link, 2x Activity;
refer also to chapter LED Descriptions, page 200.
Configuration Software
SYCON.net
Real-Time Ethernet Master
Configuration Software
netX Configuration Tool or SYCON.net
Real-Time Ethernet Slave
Transmission Rate 10/100 MBit/s, Auto-Negotiation, Auto-Cross-Over, Halfduplex/Fullduplex (100
MBit/s)
Ethernet Interface
RJ45 Socket, 10 Base-T, 100 Base-TX, potential free;
refer also to section Ethernet Interface, page 219.
USB Interface
Mini B USB Plug (5 pin); refer also to section Mini-B USB Connector (5 Pin),
page 221.
Note! Currently any cifX firmware that supports USB can be provided.
Supply Voltage
+3.3 V dc ±5 %/Typ. 650 mA
Dimensions (L x W x D)
162,2 x 100 x 20 mm
Operating Temperature -20 °C ... +70 °C
Environment
The device must be used in a pollution degree 2 environment.
UL Certification
The device is UL 508 certified (UL-File No E221530).
Table 88: Technical Data CIFX 80-RE
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011