cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 97/274
‣ Use the two part sticker according to the firmware and glue it on the
front of the CIFX 100EH-RE\CUBE Communication Interface.
Front CIFX 100EH-RE\CUBE
How to
1. Glue the "partial sticker above" with the system
specific names of the system and
communication status LEDs above 1 of the
LEDs COM1, COM0 and SYS on the front
plate.
2. Glue the "partial sticker below " with the system
specific names of the RJ45 Ethernet female
connector LEDs below 2 of the RJ45 on the
front plate.
Table 44: Fix Front Plate Sticker at CIFX 100EH-RE\CUBE
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011