cifX Communication Interfaces Real-Time Ethernet - Hilscher

Technical Data 250/274
10.3.3 EtherNet/IP Scanner (Master)
Parameter
Maximum number of EtherNet/IP connections
Maximum number of total cyclic input data
Maximum number of total cyclic output data
Maximum number of cyclic input data
Maximum number of cyclic output data
Description
64 connections for implicit and explicit
5712 bytes
5760 bytes
504 bytes per slave per telegram
504 bytes per slave per telegram
IO Connection type
Cyclic, minimum 1 ms (depending on used number of connections
and used number of input and output data)
Maximum number of unscheduled data
1400 bytes per telegram
UCMM, Class 3
Supported
Explicit Messages, Client and Server Services Get_Attribute_Single/All
Set_Attribute_Single/All
Predefined standard objects
Identity Object
Message Route Object
Assembly Object
Connection Manager
Ethernet Link Object
TCP/IP Object
Maximal number of user specific objects 20
Topology
Tree, Line, Ring
DLR (Device Level Ring)
Beacon based ’Ring Node’
ACD (Address Conflict Detection)
Supported
DHCP
Supported
BOOTP
Supported
Baud rates
10 and 100 MBit/s
Data transport layer Ethernet II, IEEE 802.3
Integrated switch
Supported
Limitations
CIP Sync Services are not implemented
TAGs are not supported
Reference to firmware/stack version
V2.4.x.x
Table 99: Technical Data EtherNet/IP Scanner (Master) Protocol
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011