cifX Communication Interfaces Real-Time Ethernet - Hilscher

Software Installation 184/274
Check in the Device Manager if the cifX Communication Interface
PC/104 (ISA) is installed properly
‣ Open the Device Manager.
‣ Check, if the display in the Device Manager shows cifX ISA (16kB).
If an exclamation mark is shown with cifX ISA (16kB).
‣ If an exclamation mark is shown with cifX ISA (16kB), then either a
resource conflict exists or the requested resources are not available.
‣ Select from the context menu on cifX ISA (16kB) > Properties.
‣ Select the tab Resources.
‣ Change the setting for the memory range respectively the interrupt with
Set Configuration Manually, as described in section Select Memory
Address for polling (Basic Configuration 0001) on page 177 or in section
Select Memory Address and interrupt (Basic Configuration 0002) on
page 180.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011