cifX Communication Interfaces Real-Time Ethernet - Hilscher

Hardware Installation, Deinstallation and Replacement 118/274
‣ Unplug the cable from the cable connector DIAG X3 (or X303) on the
CIFX 104C-RE\F Communication Interface.
Figure 30: Unplug the cable from the cable connector DIAG X303 on the CIFX 104C-RE\F*.
(*Example in this figure)
Remove cifX Communication Interface
5. Remove CIFX 104C-RE\F Communication Interface.
‣ Loosen the four fastening screws of the CIFX 104C-RE\F.
‣ Remove the CIFX 104C-RE\F.
After this:
6. Close cabinet.
‣ Close the cabinet of the PC or connecting device.
cifX Communication Interfaces Ethernet | Installation, Operation and Hardware Description
DOC060501UM30EN | Revision 30 | English | 2011-06 | Released | Public © Hilscher, 2006-2011