OfficeMate Home Office User's Guide - OfficeMate Software Solutions

Setting Up Insurance Codes, Modifiers, & Attributes
Chapter 2 Setting Up Insurance Carriers & Plans
Click Save when you are finished.
Click Exit to close the Third Party Setup window.
To set up lens power range codes
The Power Ranges tab allows you to assign CPT/HCPCS codes to specific power
ranges for each ophthalmic lens type. The power ranges themselves (low sphere to
high sphere and low cylinder to high cylinder) cannot be changed.
Open the Third Party Setup window. For information on opening the Third
Party Setup window, go to To open the Third Party Setup window on page 101.
Click the Power Ranges tab.
Click New to set up a new power range.
Select a lens type from the list.
Select a power range from the drop-down menu.
Select a procedure code from the CPT/HCPCS Code drop-down menu.
Click Save.
Repeat steps 2–7 to add additional power ranges as needed.
Note
After you set the CPT/HCPCS code for a power range and lens
type, you cannot modify it. You may, however, select the power
range from the list, click Delete to remove that line, and then
follow steps 2–7 to add a power range with the correct
CPT/HCPCS code.
108 OfficeMate Home Office User’s Guide