10.07.2015 Views

Intel® 865G/865GV Chipset Datasheet - download.intel.nl - Intel

Intel® 865G/865GV Chipset Datasheet - download.intel.nl - Intel

Intel® 865G/865GV Chipset Datasheet - download.intel.nl - Intel

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Functional DescriptionTable 24. RAM Address Translation (Dual-Channel Mode, Internal Gfx)(Dynamic Mode)Tech.Config.RowsizePagesizeRow / Column/ BankAddr BA1 BA0 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0128Mb 8Mx1664MB12x9x2Row 25 18 13 16 14 26 28 27 23 22 21 25 24 15 174KB Col 18 13 AP 12 11 10 9 8 7 6 5 3128Mb 16Mx8 128MB Row 26 14 18 16 27 26 25 24 23 22 21 29 28 15 1712x10x28KB Col 14 18 AP 13 12 11 10 9 8 7 6 5 3256Mb 16Mx16 128MB Row 26 18 13 27 16 14 26 25 24 23 22 21 29 28 15 1713x9x24KB Col 18 13 AP 12 11 10 9 8 7 6 5 3256Mb 32Mx8 256MB Row 27 14 18 28 16 27 26 25 24 23 22 21 30 29 15 1713x10x28KB Col 14 18 AP 13 12 11 10 9 8 7 6 5 3512Mb 32Mx16 256MB Row 27 14 18 28 16 27 26 25 24 23 22 21 30 29 15 1713x10x28KB Col 14 18 AP 13 12 11 10 9 8 7 6 5 3512Mb 64Mx8 512MB Row 28 18 15 28 29 27 26 31 30 23 22 21 25 24 16 1713x11x216KB Col 18 15 14 AP 13 12 11 10 9 8 7 6 5 35.2.5 Memory Organization and ConfigurationIn the following discussion the term “row” refers to a set of memory devices that aresimultaneously selected by a chip select signal. The GMCH supports a maximum of four rows ofmemory. For the purposes of this discussion, a “side” of a DIMM is equivalent to a “row” ofSDRAM devices.The memory bank address lines and the address lines allow the GMCH to support 64-bit wide x8and x16 DIMMs using 128-Mb, 256-Mb, and 512-Mb SDRAM technology.For the DDR SDRAM interface, Table 25 lists the supported configurations. Note that the GMCHsupports configurations defined in the JEDEC DDR DIMM specification o<strong>nl</strong>y (A, B, C). Non-JEDEC standard DIMMs (e.g., double-sided x16 DDR SDRAM DIMMs) are not supported. Foradditional information on DIMM configurations, refer to the JEDEC DDR DIMM specification.Table 25. Supported DDR DIMM ConfigurationsDensity 128 Mbit 256 Mbit 512 MbitDevice Width x8 x16 x8 x16 x8 x16Single / Double SS/DS SS/DS SS/DS SS/DS SS/DS SS/DS184 pin DDR DIMMs 128/256 MB 64 MB/NA 256/512 MB 128 MB/NA 512/1024 MB 256 MB/NA156 <strong>Intel</strong> ® 82<strong>865G</strong>/82<strong>865G</strong>V GMCH <strong>Datasheet</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!