C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
OK
AT+CCUG? Query new setting
+CCUG: 1,9,1
OK
Example 2:
Using default parameter values for optional parameters
AT+CFUN=5, 0 Activate CYCLIC SLEEP mode, don't reset ME
OK
AT+CFUN? Query ME mode
+CFUN: 5
OK
AT+CFUN= Set ME back to normal (default parameters: 1,0)
OK
+CFUN: 1
OK
0.4.2 Combining AT commands on the same command line
You may enter several AT commands on the same line. This eliminates the
need to type the "AT" or "at" prefix before each command. Instead, it is
only needed once at the beginning of the command line. Use a semicolon as
command delimiter.
The command line buffer accepts a maximum of 391 characters. If this
number is exceeded none of the commands will be executed and TA returns
ERROR.
The table below lists the AT commands you cannot enter together with other
commands on the same line. Otherwise, the responses may not be in the
expected order.
AT command type Comment
V.25ter commands with FAX commands (Prefix AT+F)
GSM 7.07 commands with commands (Prefix AT^S)
GSM 7.05 commands (SMS) To be used standalone
Commands starting with AT& To be used standalone
AT+IPR To be used standalone
Note: When concatenating AT commands please keep in mind that the
sequence of processing may be different from the sequential order of
command input. Therefore, if the consecutive order of the issued commands
is your concern, avoid concatenating commands on the same line.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 11