C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
EXAMPLE 2
ATS18=1 Enables the presentation of extended call release
reports.
OK
ATD03012345678 Now, a mobile originated data call is set up.
CONNECT 9600/RLP
Hello,....
+++ Call ends after remote party hung up.
+CAUSE: 8:16 Normal call release is reported, followed by the
result code NO CARRIER.
NO CARRIER The Location ID 8 stated in section 2.4.1 points to
section 2.4.6, where 16 = "Normal call clearing".
2.6 AT+CPAS Mobile equipment activity status
Syntax
Test Command
AT+CPAS=?
Exec Command
AT+CPAS
Response(s)
+CPAS: (list of supporteds)
OK
Response(s)
+CPAS:
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0
GSM 07.07 ○ ●
Command Description
TA returns the activity status of ME.
Parameter Description
(num)
0 ready
3 incoming call (ringing)
4 call in progress or call hold
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 64