C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
AT+CPWD="PS","12345678" (where 12345678 is the Master
Phone Code). Deactivates the
present phone lock.
OK
4.7 AT ^ SPWD Change Password
Use this command when you want to change the passwords defined for the
"facility lock" functions available from AT+CLCK. Specifically the command
can be used to change PIN1 orPIN2, change the password supplied from
your provider for the "call barring" supplementary service, set individual
phone security passwords, enter the unblocking key (Master Phone Code) to
restore a disabled "PS" password.
See AT commands AT+CLCK and AT^SLCK for more information on the
various lock features.
AT command AT^SPWD is identical in every respect to AT+CPWD, except that
the command syntax and response prefix is " A SPWD" instead of "+CPWD".
Syntax
Test Command
AT^SPWD=?
Write Command
AT^SPWD=, [, ]
PIN ASC0
○ ●
Response(s)
^SPWD: (list of supported (, )
OK
Response(s)
New password has been registered forthe facility
lock function.
OK
If parameter was not correct:
+CME ERROR 16 (+CME ERROR: incorrect
password)
If the password forthe selected has been
invalidated due to too many failed attempts:
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
Command Description
The test command returns a list of pairs which represent the available
facilities and the maximum length of the associated password.
The write command allows to define a new password for a password
protected lock function. Each password is a string of digits,
the length of which varies with the associated .
Note
• For further description please refer to AT+CPWD.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 93