C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
• For more information regarding SIM and ME specific message
classes refer to and the following specifications: GSM 03.38
and 3GPP TS 23.038 .
^
11.21 AT SMGR Read SMS message without setting status to
REC READ
Syntax
Test Command
AT^SMGR=?
Write Command
AT^SMGR=
Response(s)
^SMGR:
OK
Response(s)
see AT+CMGR
Reference(s) PIN ASC0
SIEMENS ● ●
Notes
• The AT^SMGR command is a specific Siemens command with the
same syntax as AT+CMGR Read SMS message. The only difference
is that the status "REC UNREAD" of a short message is not
overwritten to "REC READ".
• This command can be used only after the SMS data from the SIM
have been read successfully for the first time. Reading starts after
successful SIM authentication has been performed, and may take
up to 30 seconds depending on the SIM used. While the read
process is in progress, an attempt to use any of the SMS read
commands will result in "+CME Error: 14" (SIM busy).
^
11.22 AT SSCONF SMS Command Configuration
Syntax
Test Command
AT^SSCONF=?
Read Command
AT^SSCONF?
AT^SSCONF controls details of some SMS releated commands. Please
note that AT^SSCONF settings are stored volatile, i.e. after restart or
reset the default values will be restored.
Write Command
AT^SSCONF=
PIN ASC0
○
●
Response(s)
^SSCONF: list of supported s
OK
Response(s)
^SSCONF:
OK
Response(s)
OK
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 236