C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
3.4 AT&S Set circuit Data Set Ready (DSR) function mode
Syntax
Exec Command
AT&S[]
Response(s)
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Command Description
This parameter determines how the TA sets circuit 107 (DSR)
depending on the communication state of the TA interfacing TE.
Parameter Description
(num)(&W)(&V)
[0] (&F) DSR line is always ON
1 TA in command mode: DSR is OFF. TA in data mode:
DSR is ON.
3.5 ATE Enable command echo
Syntax
Exec Command
ATE[]
Response(s)
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Command Description
This setting determines whether or not the TA echoes characters
received from TE during command state.
Parameter Description
(num)(&W)(&V)
[0] Echo mode off
1 (&F)
Echo mode on
Note
• In case of using the command without parameter, is set to 0.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 68