C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 5.10 AT+CIMI Request international mobile subscriber identity Syntax Test Command AT+CIMI=? Exec Command AT+CIMI Response(s) OK Response(s) OK ERROR +CME ERROR: Reference(s) PIN ASC0 GSM 07.07 ● ● Command Description TA returns IMSI for identifying the individual SIM which is attached to ME. Parameter Description (str) International Mobile Subscriber Identity (string without quotes). This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 98
C55/C55I AT COMMAND SET VERSION 1.00 6 Call related Commands The AT commands described in this chapter are related to Mobile Originated (MOC, i.e. outgoing) Calls and Mobile Terminated (MTC, i.e. incoming) Calls. 6.1 Call Status Information For circuit switched calls, including voice, fax and data calls, call status information is available with URC ""+CIEV": call" (configurable via AT commands AT+CIND and AT+CMER) or - in more detail - from the list of current calls. This list can be displayed on request via AT commands AT+CLCC and AT^SLCC. It can also be issued by the ME in the form of an unsolicited result code "^SLCC" if configured with AT^SLCC and AT+CMER. URC ""+CIEV": call" and URC "^SLCC" can be configured using AT command AT^SCFG. An overview of the possible configurations and their consequences for the availability of call status information will be given here. Generally speaking, the call status values recognized by the ME are as follows: • active • held • dialing (MOC) • alerting (MOC) • incoming (MTC) • waiting (MTC) • terminating: The call is not active anymore, but inband information is still available. • dropped: The call has been suspended by the network, but may be resumed later. The values "terminating" and "dropped" are not standardized for AT command AT+CLCC, and therefore only available for command AT^SLCC. A call in any of these two states will not appear in the list of current calls as displayed with AT+CLCC. A call that is not recognized by the ME is considered to be in "unknown" state. Some networks may schedule a traffic channel for a call that is not yet in the "active" state. This is reflected in parameter of AT command AT^SLCC and the corresponding URC. Depending on the value of AT^SCFG setting , Indicator "+CIEV" will be issued (if configured with AT+CIND and AT+CMER) when a state transition ends in state "active" or in state "unknown" (if AT^SCFG setting ). When any state transition (including transitions beginning or ending in state "unknown") occurs in the list of active calls, or when a traffic channel is established (if AT^SCFG setting ). The indicator value for indicator ""+ciEV":call" will be "1" if at least one call is in states "held" or "active", and "0" otherwise. Depending on the value of AT^SCFG setting , indicator "^SLCC" will be issued (if configured with write command AT^SLCC and AT+CMER) when This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 99
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48: C55/C55I AT COMMAND SET VERSION 1.0
Page 89 and 90: XF55 AT COMMAND SET VERSION 1.00 4.
Page 97: C55/C55I AT COMMAND SET VERSION 1.0
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?