C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 • Explicit CUG invocation means that at each call setup, CUG information is added to the called number. • Upon delivery, settings are predefined with =0, =10, =0. • These delivery defaults cannot be recalled automatically. • When starting a call with ATD, Parameter 'G' or 'g' of command ATD will have no effect if the option selected for this single call is identical to the option already selected with AT+CCUG. • Current settings are saved in the ME automatically. • ATZ or AT&F do not influence the current settings. • Some combinations of parameters may lead to rejection of CUG calls by the network. For more information, please consult GSM 04.85 8.6 AT+CCFC Call forwarding number and conditions control Syntax Test Command AT+CCFC=? Write Command AT+CCFC= reason>, [, [, [, [, ]]]] Response(s) +CCFC: (list/range of supported s) OK Reference(s) PIN ASC0 GSM 07.07, GSM 02.04, GSM 02.82, GSM 03.82, GSM 04.82 Response(s) if is not equal 2 and command successful: OK if = 2, is not equal 2 and command successful: + CCFC: , [, , ] OK if = 2, = 2 and command successful: + CCFC: , [, , , ] OK If error is related to ME functionality +CME ERROR ○ ● Command Description The Test command returns the supported parameters. The write command controls the call forwarding supplementary service. Registration, erasure, activation, deactivation and status query are supported. Parameter Description (num) reason for call forwarding 0 unconditional 1 mobile busy 2 no reply This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 152
C55/C55I AT COMMAND SET VERSION 1.00 3 not reachable 4 all call forwarding (includes reasons 0,1,2 and 3) 5 all conditional call forwarding (includes reasons 1, 2 and 3) (num) network operation to be performed for Supplementary service "call forwarding" 0 disable call forwarding (disable service) 1 enable call forwarding (enable service) 2 query status of call forwarding (query service status) 3 register and activate call forwarding (register service) 4 erase and deactivate call forwarding (erase service) (str) string type phone number of forwarding address in format specified by . If you select = 3, the phone will be registered in the network. This allows you to disable/enable CF to the same destination without the need to enter the phone number once again. Depending on the services offered by the provider the registration may be mandatory before CF can be used. The number remains registered in the network until you register another number or erase it using = 4. (num) type of address octect 145 dialling string includes international access code character'+' 129 otherwise (num) integer or sum of integers each representing a class of information, i.e. a bearer service, telecommunication service or bearer service group as defined in "GSM 02.04" 1 voice 2 data 2 (data) comprises all those values between 16 and 128, that are supported both by the network and the MS. This means, a setting made for 2 applies to all remaining data classes (if supported). In addition, you can assign a different setting to a specific class. For example, you can activate Call Forwarding for all data classes, but deactivate it for a specific data class. 4 fax [7] voice, data and fax (1+2+4) 8 SMS 16 data circuit sync 32 data circuit async 64 dedicated packet access 128 dedicated PAD access 1...[7]...255 combination of some of the above classes. For example, the default setting 7 represents the sum of This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 153
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102: C55/C55I AT COMMAND SET VERSION 1.0
Page 151: C55/C55I AT COMMAND SET VERSION 1.0
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?