C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 14.5 AT+VTD Tone duration Syntax Test Command AT+VTD=? Read Command AT+VTD? Write Command AT+VTD= Response(s) +VTD: (list of supported s) OK Response(s) OK Response(s) OK Reference(s) PIN ASC0 GSM 07.07 ○ ● Command Description This command refers to an integer that defines the length of tones transmitted with the AT+VTS command. Parameter Description (num) duration of the tone in 1/10 second 1(&F)...255 14.6 AT+VTS DTMF and tone generation The Write command is intended to send ASCII characters or strings which cause the Mobile Switching Center (MSC) to transmit DTMF tones to a remote subscriber. It works during active voice calls only and offers the following variants: • AT+VTS= allows to send a sequence of DTMF tones with a duration defined with AT+VTD. • AT+VTS=[,] allows to send a single DTMF tone. In this case, the duration can be individually determined during the call. Syntax Test Command AT+VTS=? Write Command AT+VTS= Write Command AT+VTS=[, ] Response(s) +VTS: (list of supported s), (list of supported s) OK Response(s) OK Response(s) OK Reference(s) PIN ASC0 GSM 07.07 ○ ● This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 264
C55/C55I AT COMMAND SET VERSION 1.00 Parameter Description (str) String of ASCII characters in the set 0-9,#,*,A, B, C, D. Maximal length of the string is 29. The string must be enclosed in quotation marks ("..."). (str) ASCII character in the set 0...9,#,*, A, B, C, D. (num) Tone duration in 1/10 second. If not specified current setting of at+vtd is used. 1...255 14.7 AT ^ SNFD Set audio parameters to manufacturer default values Syntax Read Command AT^SNFD? Exec Command AT^SNFD Response(s) ^SNFD: (list of supported s) OK Response(s) OK Reference(s) PIN ASC0 SIEMENS ○ ● Command Description TA sets the active audio parameters to manufacturer defined default values. Notes • The restored values are: AT^SNFI: , AT^SNFO: , [0 to 4], • Remember that the factory set audio mode 1 is fixed to =4. Consequently, AT^SNFD restores together with =4, but does not affect the values of currently selected in audio modes 2 - 6. This means, if =1, the read commands AT^SNFO, AT^SNFV and AT+CLVL will always deliver =4. In all other modes the value is retained until explicitly changed. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 265
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
XF55 AT COMMAND SET VERSION 1.00 4.
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214: C55/C55I AT COMMAND SET VERSION 1.0
Page 263: C55/C55I AT COMMAND SET VERSION 1.0
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

Create successful ePaper yourself

Delete template?

Save as template?