C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
Command Description
Send the manufacturer identification to the TA.
Note
• Used for Fax Class 2 only.
10.19 AT+FOPT Set bit order independently
Syntax
Write Command
AT+FOPT=
Response(s)
OK
Reference(s) PIN ASC0
SIEMENS ○ ●
Command Description
Model specific command to set bitorder independently of the
understanding which is "mirrored" and which is direct.
Parameter Description
(num)
0 non-standard
1 standard
Note
• Used for Fax Class 2 only.
10.20 AT+FPHCTO DTE Phase C Response Timeout
Syntax
Read Command
AT+FPHCTO?
Write Command
AT+FPHCTO=
Response(s)
OK
Reference(s) PIN ASC0
EIA PN-2388 ○ ●
Response(s)
OK
If error is related to ME functionality
ERROR
Command Description
The time-out value determines how long the DCE will wait
for a command after reaching the end of data when transmitting in
Phase C. When time-out is reached, the DCE assumes that there are
no more pages or documents to send.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 206