C55/C55i AT COMMAND SET Description Preliminary - Falcom

C55/C55I AT COMMAND SET VERSION 1.00
1.6 ATX Set CONNECT result code format and call monitoring
Syntax
Exec Command
ATX[]
Response(s)
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Command Description
This parameter setting determines whether or not the TA detects the
presence of dial tone and busy signal and whether or not TA transmits
particular result codes.
Parameter Description
(num)(&W)(&V)
[0] CONNECT result code only returned, dial tone and busy
detection are both disabled.
1 CONNECT result code only returned, dial tone and
busy detection are both disabled.
2 CONNECT result code returned, dial tone
detection is enabled, busy detection is disabled.
3 CONNECT result code returned, dial tone
detection is disabled, busy detection is enabled.
4 (&F) CONNECT result code returned, dial tone and busy
detection are both enabled.
1.7 ATZ Set all current parameters to user defined profile
Syntax
Exec Command
ATZ[]
Response(s)
OK
Reference(s) PIN ASC0
V.25ter ○ ●
Command Description
TA sets all current parameters to the user profile stored with AT&W. If
a connection is in progress, it will be terminated.
All defined GPRS contexts which are not activated or not online will
be undefined (see AT+CGDCONT, AT+CGQREQ and AT+CGQMIN
command). The user defined profile is stored to the non-volatile
memory.
Parameter Description
(num)
[0] Reset to user profile
Notes
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 25