C55/C55i AT COMMAND SET Description Preliminary - Falcom

More documents

Recommendations

Info

C55/C55I AT COMMAND SET VERSION 1.00 OK AT+CPIN="3333" OK "PS" Lock password has been accepted. ME is fully operational now. To deactivate the Phone Lock: AT+CLCK="PS",0, "333 3" Phone Lock password has to be provided again. OK Now the mobile can be used with any SIM card, without the need of the phone lock password. 4.5 AT ^ SLCK Facility lock AT command AT^SLCK provides the "Facility lock" function as described for AT command AT+CLCK defined in GSM 07.07. It is identical in every respect to AT+CLCK, except that the command syntax and response prefix is " ^ SLCK" instead of "+CLCK". Syntax Test Command AT^SLCK=? Write Command AT^SLCK=, [, ][, ] Response(s) ^SLCK: list of supported s OK Reference(s) PIN ASC0 SIEMENS, GSM 07.07, GSM 02.04, GSM 02.88, GSM 03.88, GSM 04.88 ● ● Response(s) if is not equal 2 and command successful: OK if = 2 and command successful: ^SLCK: , [^SLCK: , ] [^SLCK: ...] OK If error is related to ME functionality +CME ERROR Command Description The test command returns the supported parameters. Use this command to lock, unlock or interrogate a network or ME . The command can be aborted when network facilities are being set or interrogated. Note • For further details please refer to AT+CLCK. This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission. Page 88
XF55 AT COMMAND SET VERSION 1.00 4.6 AT+CPWD Change Password Use this command when you want to change the passwords defined for the "facility lock" functions available from AT+CLCK. A password consists of a string of numeric digits with a length in the range specified by . Specifically the command can be used to change PIN1 orPIN2, change the password supplied from your provider for the "call barring" supplementary service, set individual phone security passwords, enter the unblocking key (Master Phone Code) to restore a disabled "PS" password. See AT commands AT+CLCK and AT^SLCK for more information on the various lock features. Syntax Test Command AT+CPWD=? Write Command AT+CPWD=, [, ] Response(s) + CPWD: (list of supported (, ) OK Reference(s) PIN ASC0 GSM 07.07 ● ● Response(s) New password has been registered for the facility lock function. OK If parameter was not correct: +CME ERROR 16 (+CME ERROR: incorrect password) If the password for the selected has been invalidated due to too many failed attempts: +CME ERROR ... If error is related to ME functionality: +CME ERROR Command Description The test command returns a list of pairs which represent the available facilities and the maximum length of the associated password. The write command allows to define a new password for a password protected lock function. Each password is a string of digits, the length of which varies with the associated . Parameter Description (str) Phone security locks set by client or factory: Primarily intended for the client to take safety precautions, passwords "SC" (SIM PIN) and "P2" (SIM PIN2) are usually predefined, but can be configured individually. The password for lock facility "PS" may also be factory set. "SC" SIM PIN. SIM requests password upon ME powerup and when this lock command is issued.
Page 1 and 2:
This document is available at HTTP:
Page 3 and 4:
C55/C55I AT COMMAND SET VERSION 1.0
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38: C55/C55I AT COMMAND SET VERSION 1.0
Page 87: C55/C55I AT COMMAND SET VERSION 1.0
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

C55/C55i AT COMMAND SET Description Preliminary - Falcom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?